ServiceRequest

Method Summary
	addData(Data data) Adds data to request body. Used if request body created from fragment
	addDataList(DataList datalist) Adds datalist to request body. Used if request body created from fragment
	checkConnection(boolean enabled) Enables DNS and certificate details (if any) to be gathered during the request and provided in Response.getConnectionInfo().
	clearFormParameters() Removes all for parameters set for this request
	clearHeaders() Removes all request headers set for this request
XMLReader	createServicePayload(Attachment attachment) Creates an XMLReader from the contents of the attachment. This is primarily used for testing or re-analyzing a stored response. The attachment must be XML.
XMLReader	createServicePayload(File file) Creates an XMLReader from the contents of the file. This is primarily used for testing or re-analyzing a stored response. The file must be XML.
	echo(boolean enabled) If enabled, this tells the ServiceRequest to bundle the request and submit to itself. Credentials are masked. This is used for troubleshooting requests so developers can analyze the payload and headers being sent.
Data	getFormParameters() Returns a read-only copy of the form parameters for this request.
ServiceResponse	getLastResponse() Returns last response for this request. This method returns null if the request wasn't submitted yet
String	resolveHost(String host) Returns the resolved IP address of the host
	setAWS(String accessKeyId, String secretAccessKey, String region, String service) Configures this request for AWS authentication.
	setAWSProvider(StorageProvider storageProvider, String service) Configures this request for AWS authentication using credentials and region from the specified storage provider. Works only for AWS S3 provider settings.
	setAttachment(String varName, Attachment attachment) Adds the attachment. Content is set as base64
	setAuthenticationPreemptive(boolean enabled) Enables preemptive authentication mode. In this mode ServiceRequest will send the basic authentication even before the server gives an unauthorized response in certain situations, thus reducing the overhead of making the connection. This method has effect only if authentication is controlled by ServiceRequest (true by default), see setSendAuthorization()
	setBasicAuthorization(String name, String password) Sets basic authorization for this request. Note: this method has no effect if request submitted using connector settings
	setContentType(String contentType) Sets content type of this request. Default value is application/xml
	setCoreDocument(String varName, Document doc) Adds the XML of the dta:Document element including all references. Content is set as base64.
	setEncoding(String encoding) Sets (or removes) the character encoding of the request. Default is UTF-8.
	setFile(String varName, File file) Adds the file. Content is set as base64
	setFormParameter(String name, String value) Sets request form parameter. Note: this method has no effect for POST and PUT methods if request body set from fragment or string
	setFormParameters(Data data) Sets request form parameters from data. Note: this method has no effect for POST and PUT methods if request body set from fragment or string
	setFragment(Fragment fragment) Set fragment of type "service request" as this request body
	setFragmentFormParameter(String name, Fragment value) Sets request form parameter from fragment. Note: this method has no effect for POST and PUT methods if request body set from fragment or string
	setIgnoreStatusCodes(boolean ignore) Allows to ignore http status code of response and use response body in error state. Useful for dealing with SOAP
	setMethod(String method) Sets http method for this request. Default is POST. Note that only POST and PUT methods will allow to send request body
	setNTLMAuthorization(String name, String password, String domain) Sets NTLM authorization for this request. Note: this method has no effect if request submitted using connector settings
	setOauth(String privateKey, Data params) Configures this request for OAuth authentication. Standard oauth parameters in the Data are used to construct the Authorization header. The platform will construct the minimum necessary and pass through any parameters not needing to be changed during signature calculations. Required data elements: oauth_consumer_secret (for hmac-sha1), oauth_consumer_key, and oauth_signature_method (should be rsa-sha1, hmac-sha1, or plaintext). You may also provide oauth_nonce and oauth_timestamp if desired (i.e. for testing) but these will be provided if not present.
	setPacket(String varName, Packet packet) Adds the XML of the entire transaction packet without a dsig wrapper. Content is set as base64
	setPdfDocument(String varName, Document doc) Adds the doc as a PDF. If the document is not already PDF it is converted to PDF. Content is set as base64.
	setRequestBody(String body) Sets free-form string request body. Useful for request with JSON body
	setRequestHeader(String header, String value) Adds request header or removes it if value is null
	setSendAuthorization(boolean send) Enables or disables sending HTTP authorization header if user and password specified. Allows to control authorization manually. Enabled by default.
	setTimeout(int connectTimeout, int dataTimeout) Sets the maximum timeout for the connection to (a) connect and (b) wait for data before terminating the connection. Default is 15 seconds for connect and 30 seconds for data.
	sign(String signatureId, String key) Completes the digital signature identified by signatureId.
ServiceResponse	submit(String url, boolean failOnSSLHandshake, boolean allowRedirect) Submits request to specified url. failOnSSLError used for https connections. If failOnSSLError set to true request will fail if remote host certificate do not pass validation. allowRedirect=false is more secure and should be used if you know the remote service does not forward requests to a new location. Check response code and message.
ServiceResponse	submitUsingConnector(String connector) Submits request using connector settings defined for enterprise
ServiceResponse	submitUsingConnector(String connector, String url) Submits request using connector settings defined for enterprise. Allows to redefine url for submit. Url can be absolute or relative. Relative urls are appended to the connector url.
String	urlEncode(String value) Performs URL-encoding of specified value

Method Detail

---

addData(Data data)

Adds data to request body. Used if request body created from fragment

Parameters:

• Data   data

Since: 12-22-2009

---

addDataList(DataList datalist)

Adds datalist to request body. Used if request body created from fragment

Parameters:

• DataList   datalist

Since: 12-22-2009

---

checkConnection(boolean enabled)

Enables DNS and certificate details (if any) to be gathered during the request and provided in Response.getConnectionInfo().

Parameters:

• boolean   enabled

Since: 07-12-2013

---

clearFormParameters()

Removes all for parameters set for this request

Since: 12-23-2009

---

clearHeaders()

Removes all request headers set for this request

Since: 12-23-2009

---

XMLReader createServicePayload(Attachment attachment)

Creates an XMLReader from the contents of the attachment. This is primarily used for testing or re-analyzing a stored response. The attachment must be XML.

Parameters:

• Attachment   attachment Required parameter.

Returns:  XMLReader

Since: 08-27-2010

---

XMLReader createServicePayload(File file)

Creates an XMLReader from the contents of the file. This is primarily used for testing or re-analyzing a stored response. The file must be XML.

Parameters:

• File   file Required parameter.

Returns:  XMLReader

Since: 08-27-2010

---

echo(boolean enabled)

If enabled, this tells the ServiceRequest to bundle the request and submit to itself. Credentials are masked. This is used for troubleshooting requests so developers can analyze the payload and headers being sent.

Parameters:

• boolean   enabled

Since: 09-27-2010

---

Data getFormParameters()

Returns a read-only copy of the form parameters for this request.

Returns:  Data

Since: 06-16-2021

---

ServiceResponse getLastResponse()

Returns last response for this request. This method returns null if the request wasn't submitted yet

Returns:  ServiceResponse

Since: 12-22-2009

---

String resolveHost(String host)

Returns the resolved IP address of the host

Parameters:

• String   host

Returns:  String

Since: 03-25-2016

---

setAWS(String accessKeyId, String secretAccessKey, String region, String service)

Configures this request for AWS authentication.

Parameters:

• String   accessKeyId  - Access Key ID. Required parameter.
• String   secretAccessKey  - Secret Access Key. Required parameter.
• String   region  - Region, e.g. us-west-1. Required parameter.
• String   service  - Service, e.g. ec2. Required parameter.

Since: 11-07-2016

---

setAWSProvider(StorageProvider storageProvider, String service)

Configures this request for AWS authentication using credentials and region from the specified storage provider. Works only for AWS S3 provider settings.

Parameters:

• StorageProvider   storageProvider Required parameter.
• String   service  - Service, e.g. ec2. Required parameter.

Since: 01-08-2020

---

setAttachment(String varName, Attachment attachment)

Adds the attachment. Content is set as base64

Parameters:

• String   varName  - variable name. Required parameter.
• Attachment   attachment Required parameter.

Since: 05-31-2010

---

setAuthenticationPreemptive(boolean enabled)

Enables preemptive authentication mode. In this mode ServiceRequest will send the basic authentication even before the server gives an unauthorized response in certain situations, thus reducing the overhead of making the connection. This method has effect only if authentication is controlled by ServiceRequest (true by default), see setSendAuthorization()

Parameters:

• boolean   enabled  - enable or disable preemptive authentication.

Since: 08-25-2010

---

setBasicAuthorization(String name, String password)

Sets basic authorization for this request. Note: this method has no effect if request submitted using connector settings

Parameters:

• String   name
• String   password

Since: 12-22-2009

---

setContentType(String contentType)

Sets content type of this request. Default value is application/xml

Parameters:

• String   contentType

Since: 12-22-2009

---

setCoreDocument(String varName, Document doc)

Adds the XML of the dta:Document element including all references. Content is set as base64.

Parameters:

• String   varName  - variable name. Required parameter.
• Document   doc Required parameter.

Since: 05-31-2010

---

setEncoding(String encoding)

Sets (or removes) the character encoding of the request. Default is UTF-8.

Parameters:

• String   encoding Maximum allowed size of parameter: 100

Since: 06-13-2013

---

setFile(String varName, File file)

Adds the file. Content is set as base64

Parameters:

• String   varName  - variable name. Required parameter.
• File   file Required parameter.

Since: 05-31-2010

---

setFormParameter(String name, String value)

Sets request form parameter. Note: this method has no effect for POST and PUT methods if request body set from fragment or string

Parameters:

• String   name
• String   value

Since: 12-23-2009

---

setFormParameters(Data data)

Sets request form parameters from data. Note: this method has no effect for POST and PUT methods if request body set from fragment or string

Parameters:

• Data   data

Since: 12-23-2009

---

setFragment(Fragment fragment)

Set fragment of type "service request" as this request body

Parameters:

• Fragment   fragment

Since: 12-22-2009

---

setFragmentFormParameter(String name, Fragment value)

Sets request form parameter from fragment. Note: this method has no effect for POST and PUT methods if request body set from fragment or string

Parameters:

• String   name
• Fragment   value

Since: 12-23-2009

---

setIgnoreStatusCodes(boolean ignore)

Allows to ignore http status code of response and use response body in error state. Useful for dealing with SOAP

Parameters:

• boolean   ignore

Since: 02-01-2010

---

setMethod(String method)

Sets http method for this request. Default is POST. Note that only POST and PUT methods will allow to send request body

Parameters:

• String   method

Since: 12-22-2009

---

setNTLMAuthorization(String name, String password, String domain)

Sets NTLM authorization for this request. Note: this method has no effect if request submitted using connector settings

Parameters:

• String   name
• String   password
• String   domain

Since: 12-22-2009

---

setOauth(String privateKey, Data params)

Configures this request for OAuth authentication. Standard oauth parameters in the Data are used to construct the Authorization header. The platform will construct the minimum necessary and pass through any parameters not needing to be changed during signature calculations. Required data elements: oauth_consumer_secret (for hmac-sha1), oauth_consumer_key, and oauth_signature_method (should be rsa-sha1, hmac-sha1, or plaintext). You may also provide oauth_nonce and oauth_timestamp if desired (i.e. for testing) but these will be provided if not present.

Parameters:

• String   privateKey  - Base64 encoded private key, required if oauth_signature_method is rsa-sha1.
• Data   params

Since: 01-13-2015

---

setPacket(String varName, Packet packet)

Adds the XML of the entire transaction packet without a dsig wrapper. Content is set as base64

Parameters:

• String   varName  - variable name. Required parameter.
• Packet   packet Required parameter.

Since: 05-31-2010

---

setPdfDocument(String varName, Document doc)

Adds the doc as a PDF. If the document is not already PDF it is converted to PDF. Content is set as base64.

Parameters:

• String   varName  - variable name. Required parameter.
• Document   doc Required parameter.

Since: 05-31-2010

---

setRequestBody(String body)

Sets free-form string request body. Useful for request with JSON body

Parameters:

• String   body

Since: 12-22-2009

---

setRequestHeader(String header, String value)

Adds request header or removes it if value is null

Parameters:

• String   header Required parameter.
• String   value

Since: 12-22-2009

---

setSendAuthorization(boolean send)

Enables or disables sending HTTP authorization header if user and password specified. Allows to control authorization manually. Enabled by default.

Parameters:

• boolean   send  - enable or disable auth header. True by default.

Since: 06-09-2010

---

setTimeout(int connectTimeout, int dataTimeout)

Sets the maximum timeout for the connection to (a) connect and (b) wait for data before terminating the connection. Default is 15 seconds for connect and 30 seconds for data.

Parameters:

• int   connectTimeout Maximum allowed size of parameter: 30
• int   dataTimeout Maximum allowed size of parameter: 300

Since: 07-24-2013

---

sign(String signatureId, String key)

Completes the digital signature identified by signatureId.

Parameters:

• String   signatureId Required parameter.
• String   key  - base64 encoded key. Required parameter.

Since: 03-21-2013

---

ServiceResponse submit(String url, boolean failOnSSLHandshake, boolean allowRedirect)

Submits request to specified url. failOnSSLError used for https connections. If failOnSSLError set to true request will fail if remote host certificate do not pass validation. allowRedirect=false is more secure and should be used if you know the remote service does not forward requests to a new location. Check response code and message.

Parameters:

• String   url Required parameter.
• boolean   failOnSSLHandshake
• boolean   allowRedirect

Returns:  ServiceResponse

Since: 10-08-2015

---

ServiceResponse submitUsingConnector(String connector)

Submits request using connector settings defined for enterprise

Parameters:

• String   connector

Returns:  ServiceResponse

Since: 12-22-2009

---

ServiceResponse submitUsingConnector(String connector, String url)

Submits request using connector settings defined for enterprise. Allows to redefine url for submit. Url can be absolute or relative. Relative urls are appended to the connector url.

Parameters:

• String   connector  - name of http(s) connector. Required parameter.
• String   url  - url for submit. If null or empty string specified then url from connector will be used.

Returns:  ServiceResponse

Since: 07-21-2010

---

String urlEncode(String value)

Performs URL-encoding of specified value

Parameters:

• String   value

Returns:  String

Since: 12-22-2009